出口mbbr一体化污水处理设备
编辑:出口污水处理设备 来自:https://www.zqwscl.com /日期:2022-09-12 13:57 / 人气:
mbbr一体化污水处理设备兼具传统的流化床和生物接触氧化法的优点,是一种新型高效的污水处理方法,依靠曝气池内的曝气搅拌和水流的提升作用使生物载体处于流动状态,进而形成悬浮生长的活性污泥和附着生长的生物膜,这就使得移动床生物膜使用了整个一体化污水处理设备空间,充分发挥两者的优势。
山东中侨启迪研制的出口mbbr一体化污水处理设备具有的工艺优势如下:
1、实现地埋式一体化结构,占地面积小。节省施工周期及基建费用,自有工厂生产,工地现场安装,无需其他建设费用。
2、耐冲击性强,性能稳定,运行可靠。冲击负荷以及温度变化对流动床工艺的影响要远远小于活性污泥法的影响。当污水成分发生变化或污水毒性增加时,生物膜对此受力很强。
3、自动化程度高,无需专人值守,故障系统报警,便于管理。
4、污染物降解效率高,系统连续运行,出水标准尊可达到国家一级排放标准,对进水有机负荷的变动适应性强,同时没有活性污泥法易出现的污泥膨胀问题。
5、良好的脱氮能力:填料上形成好氧、缺氧和厌氧环境,硝化和反硝化反应能够在一个反应器内发生,对氨氮的去除具有良好的效果。
6、去除有机物效果号:反应器内污泥浓度较高,一般污泥浓度为普通活性污泥法的5-10倍,可高达30-40g/L。
7、易于维护管理,曝气池内无需设置填料支架,对填料以及池底的曝气装置的维护方便。
8、中侨启迪对填料表面的化学特性及悬浮填料的脱落机制进行了深入的研究,增加了天里哦啊的比表面积;联合填料厂家应用了活性炭、淀粉、明胶等作为生物活性添加剂,使悬浮填料能够促进微生物的生长和繁殖。
9、多级mbbr、mbbr和A/O联合工艺等都具有各自的优点,对这些组合工艺组合进行了一系列的实际应用。
10、中侨启迪通过对反应器流体力学的研究,确定反应器的形状,可达到最优化的反应器结构,从而避免填料的堆积,降低能耗。
通过以上mbbr一体化污水处理设备的介绍,如果您有需要购买相关设备出口,可以联系中侨启迪的客服,欢迎您的咨询。
Mbbr integrated sewage treatment equipment is an efficient sewage treatment equipment developed by Shandong Zhongqiao Qidi learning from foreign advanced mobile bed biofilm reactor process and independent innovation.
Mbbr integrated sewage treatment equipment has the advantages of the traditional fluidized bed and biological contact oxidation method, is a new and efficient sewage treatment method, relying on the aeration stirring in the aeration tank and the lifting effect of the water flow to make the biological carrier in the flow state, and then form a suspended growth of activated sludge and adhesion growth biofilm, which makes the mobile bed biofilm use the entire integrated sewage treatment equipment space, give full play to the advantages of both.
The export MBBR integrated sewage treatment equipment developed by Shandong Zhongqiao Tuss has the following process advantages:
1. Realize buried integrated structure, occupy a small area. Save the construction cycle and infrastructure costs, own factory production, site installation, no other construction costs.
1. Realize buried integrated structure, occupy a small area. Save the construction cycle and infrastructure costs, own factory production, site installation, no other construction costs.
2. Strong impact resistance, stable performance and reliable operation. The impact of shock load and temperature changes on the flow bed process is much smaller than that of the activated sludge method. When the composition of the sewage changes or the toxicity of the sewage increases, the biofilm is very strong on this.
3, high degree of automation, no need for special personnel, fault system alarm, easy to manage.
4. The pollutant degradation efficiency is high, the system runs continuously, the effluent standard can reach the national first-level discharge standard, and the adaptability to the change of the organic load of the inlet water is strong, and there is no sludge expansion problem that is easy to occur by the activated sludge method.
5, good denitrification capacity: the formation of aerobic, hypoxic and anaerobic environment on the filler, nitrification and denitrification reaction can occur in a reactor, the removal of ammonia nitrogen has a good effect.
6, the effect of removing organic matter number: the sludge concentration in the reactor is high, the general sludge concentration is 5-10 times that of the ordinary activated sludge method, which can be as high as 30-40g/L.
7. Easy maintenance and management, there is no need to set up a packing bracket in the aeration tank, and the maintenance of the filler and the aeration device at the bottom of the pool is convenient.
8. Zhongqiao TusS conducted in-depth research on the chemical characteristics of the surface of the filler and the shedding mechanism of the suspended filler, and increased the specific surface area of the sky; The joint filler manufacturers have applied activated carbon, starch, gelatin, etc. as bioactive additives, so that the suspended filler can promote the growth and reproduction of microorganisms.
9. Multi-stage mbbr, mbbr and A/O combined processes have their own advantages, and these combined process combinations have been applied in a series of practical applications.
10. Through the study of reactor fluid mechanics, Zhongqiao Tuspark determines the shape of the reactor and can achieve the optimal reactor structure, thereby avoiding the accumulation of fillers and reducing energy consumption.
Through the introduction of the above mbbr integrated sewage treatment equipment, if you need to purchase related equipment for export, you can contact the customer service of Zhongqiao Tuspark and welcome your consultation.
内容搜索 Related Stories
推荐内容 Recommended
- 出口气浮机一体化污水处理设备09-17
- 出口mbbr一体化污水处理设备09-12
- 出口化工污水处理设备09-06
- 出口实验室污水处理设备08-29
- 污水处理设备价格08-27
- 外贸污水处理设备哪家好?08-22
- 出口污水处理设备供应商08-20
- 出口地埋污水处理设备07-04
- 出口景区污水处理设备07-01
- 外贸医疗污水处理设备06-27
- 出口环保污水处理设备06-24
- 出口气浮机污水处理设备06-20
- 出口医疗污水处理设备06-16
- 出口餐饮污水处理设备06-15
- 外贸地埋式污水处理设备06-13