高端一体化污水处理设备定制
编辑：出口污水处理设备 来自：https://www.zqwscl.com /日期：2023-08-08 11:16 / 人气：
1、结构布局紧凑，体积小，占地面积小，可选择地埋或地上安装。
2、出水稳定，去除有机物效果好，出水水质好，能达到排放标准。
3、操作管理方便，无需专人管理，自动化程度高，有效节省运行费用。
4、耐冲击负荷强。
5、工艺过程中的各工序可根据水质、水量进行调整，运行灵活。
6、处理设备少，构造简单，便于维护和操作管理。
7、设备一般涂刷防腐涂料后，防腐寿命可达20年以上，能耐酸、碱、盐、汽油，耐老化、耐冲磨等。
8、净化程度较高，污泥产量较少，除臭方法也是使用高级常规排放，还加入了土壤除臭措施，不会有异味。
中侨启迪一体化生活污水处理设备的设计原则：
1、依据污水水质特点，采用先进、成熟、可靠的处理工艺和设备，实用性和先进性兼顾，保证污水达到甲方要求的出水指标——《城镇污水处理厂污染物排放标准》（GB18918-2002）表中的一级B标准。
2、方案设计中尽量减少占地，合理布局，节省投资。
3、方案选择稳妥可靠、技术先进、投资省、运行费用低、管理简单、维修量少、运行灵活的污水处理工艺和设备，确保污水处理站长期稳定运行达标排放。
4、设计中尽量降低建设费用，减轻负担，达到低投入、高收效的目的。
5、设计中必须贯彻执行国家和地区有关环保的政策，符合国家有关法规、规范及标准。
6、根据实际情况，控制柜采手动、自动控制可切换。
7、污水处理设施能够耐高峰冲击负荷以适应水质水量的变化，可实现超越排放。
8、必须充分考虑污水处理系统配套设施的减振、降噪、采取有效措施，防止对环境产生二次污染。
9、必须充分考虑污水处理站在处理过程中产生的环境污染及臭气排放。
10、所有外购件及设备的供货方应属于《城市污水处理设备推荐产品目录》中的设备生产厂或进口产品，须具有省级以上检测部门颁发的技术评审证书或产品质量合格证书及相关的技术资料、效果检测报告等。
11、供货单位应设计要求选择设备。设备的功能应是技术先进、运行安全、性能可靠，适应负荷变化，操作管理方便，易损部件少，维护检修方便，占地少，噪音低，减震效果好、防腐性强，拆卸简单，材料选择合理等条件。不可更换的设备主体使用总寿命不应小于15年，机电设备寿命不应小于5年。并提供设备类型、主体部分材质、设备选型说明及品牌、制造厂家、防腐、安全保护措施等有关文件。
12、污水处理集水池均采用钢筋混凝土水池，处理池采用一体化污水处理钢设备，并设有独立的设备、控制等位置。
13、以保护城市水源，改善城市环境，促进开发共同发展为目的，对该区生活污水进行治理，应充分发挥建设该项目的社会效益和环境效益。
山东中侨启迪自主研发、设计、生产的一体化生活污水处理设备：
1、壳体采用碳钢材质，强度高、耐老化、寿命长。
2、内部采用鼓风曝气内循环技术，使污水与活性污泥、溶解氧充分混合，可大幅度提高氧的传质效率和污泥的生化活性。
3、曝气池内装填有我公司研发生产的功能型生物亲和填料，挂模迅速、微生物生长快、活性高，兼具过滤作用，因而出水水质好，比其他厂家一体化污水处理设备采用的软性填料具有非常明显的优势。
4、剩余污泥通过污泥泵提升到污泥浓缩池，在污泥池内积累达到一定数量后可用环卫化粪池清理车抽走处理。
中侨启迪一体化生活污水处理设备的工艺技术特点：
1、工艺能耗小，除在调节池前设置的污水提升泵和曝气鼓风机外，基本上没有能量消耗。此工艺技术先进，运行成本低，具有节能，减少运行时间，减少人员班次和劳动强度等优点，适合于各种类型的生活污水处理工程。
2、通过设置水解池，提高污染物的去除率；生物接触氧化池水流属于完全混合型，能有效抵抗水质、水量变化的冲击负荷，提高处理装置运行的稳定性。由于采用了前置厌氧水解池，形成厌氧——好氧除磷脱氮工艺，具有良好的脱氮除磷作用。
3、一体化处理系统主体采用碳钢成型，其施工周期比同等规模的混凝土池大大缩短，具有施工周期短、工程上马快等优点。一体化设备采用模块化设计，如果建设单位以后处理规模增加，只需根据水量加装一套处理模块即可使用。
4、本工程中除机房外，所有处理设施均可建于地面以下，地表以上可覆土做绿化带、道路、停车场或其他用地，不占建设用地。
5、本装置采用先进、成熟的处理工艺，处理后水质指标达到国家排放标准。
6、本系统的控制系统，自动化程度高，运行管理简便。
7、一体化处理器采用复合材料成型，埋于地下，仅漏检修孔在外。投资低，质量优，寿命长，永无渗漏。一次投入永久受益。
欢迎您来公司定制一体化污水处理设备！
The advantages of the Chinese and overseas enlightenment high-end integrated domestic sewage treatment equipment are as follows:
1, the structure layout is compact, small volume, small area, can be selectively buried or installed on the ground.
2, the water is stable, the organic removal effect is good, the water quality is good, can meet the discharge standards.
3, convenient operation and management, no special management, high degree of automation, effectively save operating costs.
4, Strong impact-resistant load.
5, Each process in the process can be adjusted according to the water quality and water quantity, and the operation is flexible.
6, less processing equipment, simple structure, easy to maintenance and operation management.
7, the equipment is generally coated with anti-corrosion paint, anti-corrosion life can reach more than 20 years, acid resistance, alkali, salt, gasoline, aging resistance, wear resistance, etc.
8, the purification degree is high, the sludge production is less, the deodorization method is also using advanced conventional discharge, but also added the soil deodorization measures, there will be no smell.
Design principles of the integrated domestic sewage treatment equipment:
1. According to the characteristics of sewage quality, adopt advanced, mature and reliable treatment technology and equipment, practical and advanced, to ensure that the sewage meets the effluent index required by Party A —— Grade B standard in the Pollutant Discharge Standard of Urban Sewage Treatment Plant (GB18918-2002).
2. In the scheme design, minimize the occupation, make reasonable layout and save investment.
3. The scheme selects reliable and reliable, advanced technology, less investment, low operation cost, simple management, less maintenance and flexible operation to ensure the long-term and stable operation of the sewage treatment station to meet the standard discharge.
4. In the design, try to reduce the construction cost, reduce the burden, and achieve the purpose of low investment and high efficiency.
5, the design must carry out the national and regional environmental protection policies, comply with the relevant national regulations, norms and standards.
6. According to the actual situation, the control cabinet mining manual and automatic control can be switched.
7. Sewage treatment facilities can withstand peak impact load to adapt to the changes of water quality and quantity, and can achieve beyond the discharge.
8. Full consideration must be given to the vibration reduction and noise reduction of the supporting facilities of the sewage treatment system, and to take effective measures to prevent secondary pollution to the environment.
9, must fully consider the environmental pollution and odor discharge produced by the sewage treatment station in the treatment process.
10. The suppliers of all purchased parts and equipment shall belong to the equipment manufacturer or imported products in the Catalogue of Recommended Products for Urban Sewage Treatment Equipment, and shall have the technical evaluation certificate or product quality certificate issued by the testing department at or above the provincial level, relevant technical data and effect testing report, etc.
11. The supplier shall select equipment by design requirements. The functions of the equipment should be advanced technology, safe operation, reliable performance, adapt to load changes, convenient operation and management, less vulnerable parts, convenient maintenance, less footprint, low noise, good shock absorption effect, strong corrosion resistance, simple disassembly, reasonable material selection and other conditions. The total service life of the non-replaceable equipment shall not be less than 15 years, and the life of mechanical and electrical equipment shall not be less than 5 years. And provide equipment type, main part of the material, equipment selection description, brand, manufacturer, anticorrosion, safety protection measures and other relevant documents.
12, the sewage treatment pool is reinforced concrete pool, the treatment pool adopts integrated sewage treatment steel equipment, and is equipped with independent equipment, control and other positions.
13. For the purpose of protecting the urban water source, improving the urban environment and promoting the development and common development, the treatment of domestic sewage in the area should give full play to the social and environmental benefits of the construction of the project.
Integrated domestic sewage treatment equipment independently developed, designed and produced by Shandong Zhongqi Enlightenment:
. The shell is made of carbon steel, with high strength, aging resistance and long life.
2, the internal use of blast aeration internal circulation technology, so that sewage and activated sludge, dissolved oxygen fully mixed, can greatly improve the mass transfer efficiency of oxygen and the biochemical activity of sludge.
3. The aeration tank is filled with functional biological affinity fillers developed and produced by our company. The mold has rapid hanging, fast microbial growth, high activity and both filtration effect, so the effluent quality is good, which has obvious advantages over the soft fillers used by other manufacturers' integrated sewage treatment equipment.
4. The remaining sludge is lifted to the sludge concentration tank through the sludge pump, which accumulates to a certain amount and can be removed by the sanitation septic tank cleaning truck.
Technology characteristics of the integrated domestic sewage treatment equipment:
1. The process energy consumption is small. Except for the sewage lifting pump and aeration blower set in front of the regulating tank, there is basically no energy consumption. This process has advanced technology, low operation cost, has the advantages of energy saving, reducing operation time, reducing personnel shift and labor intensity, and is suitable for various types of domestic sewage treatment projects.
2. Improve the removal rate of pollutants; the water flow of biological contact oxidation tank is completely mixed, which can effectively resist the impact load of water quality and quantity change, and improve the operation stability of the treatment device. Due to the use of the front anaerobic hydrolysis pool, the formation of anaerobic —— aerobic phosphorus removal process, which has a good nitrogen and phosphorus removal effect.
3. The main body of the integrated treatment system is formed by carbon steel, and its construction period is greatly shortened than that of the concrete pool of the same scale, which has the advantages of short construction period and fast construction process. The integrated equipment adopts modular design. If the construction unit increases the processing scale in the future, it only needs to install a set of processing modules according to the water quantity.
4. In this project, except the machine room, all treatment facilities can be built below the ground, and the soil above the surface can be used for green belt, road, parking lot or other land, and does not occupy the construction land.
5. The device adopts advanced and mature treatment process, and the water quality index reaches the national emission standard after treatment.
6. The control system of the system has a high degree of automation and simple operation and management.
7. The integrated processor is formed with composite material, buried in the ground, and only leaks the manhole outside. Low investment, high quality, long life, no leakage. One investment is permanent benefit.
Welcome you to the company to customize the integrated sewage treatment equipment!
内容搜索 Related Stories
推荐内容 Recommended
- 外贸农村一体化污水处理设备09-05
- 高端一体化污水处理设备定制08-08
- 出口城市污水处理设备08-01
- 出口MBBR工艺污水处理设备07-18
- 外贸一体化泵站污水处理设备06-13
- 外贸QDPP一体化污水处理设备06-03
- 外贸MBBR一体化污水处理设备05-22
- 出口养殖污水处理设备05-13
- 出口高速公路污水处理设备04-23
- 出口葡萄酒污水处理设备03-06
- 出口食品厂污水处理设备02-13
- 外贸旅游景点污水处理设备02-06
- 出口高品质一体化污水处理设备01-16
- 地埋式外贸食品加工污水处理设备01-09
- 出口PP一体化污水处理设备12-26